Welding-induced Residual Stresses in U-Ribs of a Steel Bridge Deck

Abstract

To calculate the welding-induced residual stresses in U-ribs of the steel deck plate and conduct quantitative analysis of influential factors, the U-ribs of steel deck plate of Xinghai Bay Bridge was taken as the research object. In the ABAQUS finite element software, the local models of U-ribs of steel deck plate were established. Nodal body force loads, i.e., heat generation rate, of the double ellipsoidal heat source models were applied via the compiled subsidiary Dflux program. The welding process of the v-groove welds was simulated, to obtain the residual stresses distribution in the top plate and U-rib plates. The influence of thickness of top plate and angle of welding groove on the residual stresses in the U-ribs were studied. The results show that the welding-induced residual stresses calculated by the numerical method proposed in this paper agree well with the experimental data. The maximum residual stresses in the top plates and the U-rib plates all occur near the welds, which exceeds the yielding limitation of the material. As the thickness of top plate increases, the maximum values of residual stresses in the top plates and U-ribs increase. However, with the increase of groove angle, the maximum values of residual stresses in the top plates and U-rib plates decrease.