Abstract
The aim of this study was to investigate the effect of deposition temperature on the structural, optical, morphological, and dielectric properties of yttria-stabilised zirconia (YSZ) films prepared by sol-gel spin-coating method. X-ray diffraction (XRD) measurements of YSZ films showed that the peaks of the cubic phase were prominent and the peak intensities increased with deposition temperature. The crystallite size, dislocation density, and microstrain of the thin films were identified by XRD. It was observed that the crystal size of the YSZ thin films increased from 16 nm to 22 nm with the deposition temperature. The surface roughness of the thin films was found to have changed as revealed by Atomic Force Microscopy (AFM) measurements. The roughness increased from 7.72 nm to 11.92 nm with increasing temperature. The optical transmittance of the YSZ thin films was investigated in the wavelength range 200-900 nm and was found to increase slightly with increasing deposition temperature. Metal-Oxide-Semiconductor (MOS) devices were fabricated from these YSZ materials for dielectric characterization. The dielectric properties of the Ag/YSZ/n-Si MOS structure were investigated. It was found that the capacitance, conductivity and other dielectric parameters of these structures are strongly frequency dependent.
Publisher
Sinop Universitesi Fen Bilimleri Dergisi