Author:
Dolinenko V.V., ,Shapovalov E.V.,Kolyada V.A.,Skuba T.G., , ,
Abstract
A functional transformer with fuzzy logic is synthesized, which allows to get the estimations of weld beads height and width at the arbitrary values of entry parameters: wire feed speed and torch transverse oscillations amplitude. The influence of these input parameters on the base metal penetration and beads geometric parameters, welded using MIG/MAG process, were studied. Surfacing was performed by a robotic system with an arc power supply "Fronius TPS- 320i", which operated in the mode of arc process synergetic control. The formation of both individual beads and surfacing layers at different overlap coefficients has been studied. The arc surfacing process was realized in a mixture of protective gases (Ar+18%CO2) using a welding wire Св-08Г2С with a 1.0 mm diameter. Surfacing speed – 4 mm/s, frequency of welding torch oscillations – 1 Hz. The obtained experimental dependences of beads width and height, as well as the length of the welding pool can be used in both: creating of multi-pass MIG/MAG surfacing program for robotic restoration of critical purposes parts surfaces, and in preparing of FEM model of MIG/MAG surfacing.
Publisher
National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
Reference10 articles.
1. Ryabtsev I.A., Perepletchikov E.F., Bartenev I.A. (2018), "Influence of the amplitude and frequency of oscillations of the plasmatron on the chemical and structural inhomogeneity of the metal deposited by the plasma-powder method",Automatic Welding, 5, pp. 3-8.
2. Babinets A.A., Ryabtsev I.O., Lentyugov I.P. (2020), "Injection of the amplitude and frequency of the electrode dart during arc deposition onto the molding and structure of the deposited metal and the penetration of the base metal",Automatic Welding, no. 10, pp. 26-33.
3. Ryabtsev I.A., Babinets A.A., Lentyugov I.P., Turyk E.V. (2019), "Influence of the electrode wire feed rate on the penetration of the base metal during arc surfacing",Automatic Welding, no. 3, pp. 23-29.
4. Dolinenko V.V., Kolyada V.A., Shapovalov E.V., Skuba T.G. (2013), "Algorithm of technological adaptation for automated multi-pass MIG/MAG welding of products with variable groove widths",Automatic Welding, no. 1, pp. 16-22.
5. "Fronius TPS-320i", available at: https://www.fronius.com/en/welding-technology/products/ manual-welding/migmag/tpsi/tpsi/tps-320i (accessed June 18, 2021).