Abstract
The study of the physical and mechanical properties of polycarbonate under various temperature conditions, taking into account its widespread use as a base material of monolithic polycarbonate systems in various climatic regions, will ensure a high degree of reliability of structures during operation in a wide temperature range. The authors of the article conducted a series of tensile tests of monolithic polycarbonate in the temperature range from -60 to +80 °C. The influence of temperature on the following characteristics of monolithic polycarbonate was evaluated: elongation at break, tensile yield strength, tensile stress at break, strains at the end of the elastic stage of the material. As a result of the conducted experimental studies, the relationship between the strength properties of monolithic polycarbonate and the operating temperature was revealed. The values of elongation at break at temperatures exceeding 15 °C for various samples generally correspond to the values obtained during tests conducted under standard conditions.
Publisher
Peoples' Friendship University of Russia
Reference16 articles.
1. Avdeev K.V., Tuchin M.A., Bobrov V.V., Kudryavtsev N.A., Skakun P.V. Testing of monolithic polycarbonatesheet for coating structures. Industrial and Civil Engineering. 2022;(10):56–61. (In Russ.) https://doi.org/10.33622/0869-7019.2022.10.56-61
2. Bunto O.V., Zhamoydik S.M. Experimental investigations of strength and deformation properties of polymeric materials considered as a translucent filling of easy-to-reset structures. Vestnik Universiteta grazhdanskoi zashchity MChS Belarusi. 2023;7(1):32–42. (In Russ.) https://doi.org/10.33408/2519-237X.2023.7-1.32
3. Bobina E.A., Danilaev M.P., Klabukov M.A., Kuklin V.A. Diagnostics of the destruction of monolithic polycarbonate using the piezoelectric effect. Vestnik Kazanskogo gosudarstvennogo tekhnicheskogo universiteta im. A.N. Tupoleva, 2020;76(2):5–10. (In Russ.)
4. Bozhanov P.V., Treshchev A.A. Determination of the strength criteria at the onset of plastic deformation in polycarbonate. Innovacii i investicii. 2018;(12):323–326. (In Russ.) EDN: PLDROZ
5. Markov A.V., Derivolkov D.I., Duvanov D.S. Stress state investigation and evaluation of residual stresses in thermoformed polycarbonate sheet. Plasticheskie massy. 2019;(3–4):21–24. (In Russ.) https://doi.org/10.35164/0554-29012019-3-4-21-24