Flexural stiffness of lightweight steel-concrete slab panels made of low-density foam concrete-Reference-Cited by-同舟云学术

Flexural stiffness of lightweight steel-concrete slab panels made of low-density foam concrete

Published:2023-09-30 Issue:3 Volume:19 Page:302-312
ISSN:2587-8700
Container-title:Structural Mechanics of Engineering Constructions and Buildings
language:
Short-container-title:Struct. Mech. of Eng. Const. and Build

Author:

Rybakov Vladimir A.^ORCID

Abstract

Lightweight steel-concrete structures (LSCS) are a type of steel-concrete structures where the filling concrete is monolithic (pouring) foam concrete with density 100-1000 kg/m3, the profile steel is lightweight steel thin-walled structures (LSTS), and fiber cement panels perform the function of non-removable formwork. As a rule, these structures are made of structural and heat-insulating foam concrete, which has good insulation and technical characteristics and sufficient strength. The object of the study is lightweight steel-concrete slab panels, which are one of the special cases of LSCS, made of monolithic foam concrete with density of 400 kg/m3. An analysis of the bending stiffness of LSBC slab panels by comparing the experimental data with analytical calculations was carried out. It was found that bendable LSCS made of monolithic foam concrete with density of 400 kg/m3 operate in physical nonlinear way. It was shown that the bending stiffness of LSCS floor panels can be determined as the sum of stiffnesses of profiled steel and foam concrete at the linear stage of work. The reliability of the proposed methodology within the limits of linear operation was demonstrated. It was proved both experimentally and theoretically that the bending stiffness of panels based on LSCS is higher than the bending stiffness of similar panels made of lightweight thin-walled steel (LTSS) by about 30%.

Publisher

Peoples' Friendship University of Russia

Subject

General Materials Science

Reference28 articles.

1. Tsvetkova A.A. The joint stiffness of precast reinforced concrete wall panels to shear in their plane before cracking. Engineering Research. 2022;(4):26–33. (In Russ.)

2. Efimchenko M.I. Problems and prospects of modern panel housing construction. Engineering Research. 2022;(4):17–25. (In Russ.)

3. Rybakov V.A., Kozinetc K.G., Vatin N.I., Velichkin V.Z., Korsun V.I. Lightweight steel concrete structures technology with foam fiber-cement sheets. Magazine of Civil Engineering. 2018;(6):103–111. https://doi.org/10.18720/MCE.82.10

4. Rybakov V.A., Ananeva I.A., Pichugin E.D., Garifullin M.G. Heat protective properties of enclosure structure from thin-wall profiles with foamed concrete. Magazine of Civil Engineering. 2020;(2):11–20. https://doi.org/10.18720/MCE.94.2

5. Shevtsov S.V., Astafeva N.S. The concept of modular construction on the example of the use of light metal structures. Engineering Research. 2022;(3):30–37. (In Russ.)