Corrosion in CO2 Systems with Impurities Creating Strong Acids

Abstract

There are several proposed specifications for CO2 transport regarding how much impurities that can be allowed in the CO2 stream. Many of these specifications are based on health, safety, and environment (HSE) considerations in case of accidental spill, and only limited focus has been on the pipeline integrity. Previous work has demonstrated that many of the impurities that are expected to be present in CO2 captured from flue gasses may react and form corrosive species. The present paper studied impurity reactions and corrosion under simulated transport conditions (25°C and 10 MPa of CO2). An experiment was performed in a transparent autoclave which allowed for in situ visual observation. Chemical reactions between the impurities were observed even at very low concentrations (<100 ppmv). These reactions contributed to the production of nitric and sulfuric acid together with formation of elemental sulfur. Corrosion was observed on coupons of carbon steel, but not on stainless steels. The corrosion rate of carbon steel was low, but the amount of acids and solids (corrosion products) produced cannot be accepted from a pipeline integrity perspective. Further experimental studies are needed to determine specific limits for impurity concentrations in captured CO2 for transport.