Author:
Mylnikov V. V.,Pronin A. I.,Veselov S. V.,Valko D. A.
Abstract
The paper presents the results of a study on the durability of cutting ceramics: a replaceable polyhedral plate developed at NSTU and cutting ceramics WOK-60 when processing hardened steel blanks made of 40X (45HRC) steel. As a result of the tests carried out, it was found that with the use of cutting modes developed at KNAU, the durability of SMP from cutting ceramics created at NSTU is more than 1.7 times higher than the performance of plates based on the WOK-60 material. At the same time, the roughness of the treated surface of the work piece was Ra = 0.35 ? 0.05 microns when using SMP from the developed ceramics Ra = 0.55 ? 0.05 microns when using WOK-60 plates. The stages of destruction of cutting ceramic plates are revealed, taking into account the hierarchy of structural scales.
Publisher
Izdatel'skii dom Spektr, LLC
Reference17 articles.
1. Schulz H., Spur G. Aspect in Cutting Mechanism in High Speed Cutting // Annals of CIPR. 1989. V. 38, No. 1. P. 51 – 54.
2. Dawson Т. Т. Hard turning, tool life, and surface quality // Manufacturing Engineering, 2001. V. 126, No. 4. P. 88, 90, 92 – 94, 97 – 98.
3. Коr D. Hard turning might not be as hard as you think // Modem Machine Shop. V. 77, No. 4. 2004. P. 72 – 76.
4. Kishawy H., Dumitrescu M., Ng E. G., Elbestawi M. A. Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy // Int. J. of Machine Tools and Manufacture. 2005. V. 45. P. 219 – 227.
5. Волков Д. И., Проскуряков С. Л. Динамическая модель зоны резания для условий высокоскоростного точения // Вестник Рыбинской государственной авиационной технологической академии им. П. А. Соловьева. 2011. № 1(19). С. 43 – 49.