THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET-Reference-Cited by-同舟云学术

THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET

Published:2024 Issue:3 Volume:28 Page:51-56
ISSN:1093-3611
Container-title:High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes
language:en
Short-container-title:High Temp Mat Proc

Author:

Shchur Pavel A.,Khodyrev T. V.

Abstract

In this work, the main factors influencing the appearance of the antiadhesive properties on the surface of polyethylene terephthalate (PET) with a fluorocarbon film were considered. The chemical composition, surface charge, and surface relief of antimicrobial fluorocarbon films deposited on PET were studied. The fluorocarbon films were formed by ion-plasma technology at reduced pressure using a two-component gas mixture consisting of tetrafluoromethane and cyclohexane.

Publisher

Begell House

Link

https://www.dl.begellhouse.com/download/article/64f72d2a3700899a/HTM-51601.pdf

Reference12 articles.

1. Baum, E.A., Lewis, T.J., and Toomer, R., Decay of Electrical Charge on Polyethylene Films, J. Phys. D: Appl. Phys., vol. 10, no. 4, pp. 487-497, 1977. DOI: 10.1088/0022-3727/10/4/013

2. Elinson, V.M., Kravchuk, E.D., and Schur P.A., The Study of Relief Parameters of Fluorocarbon Coatings Antiadhesive to Microorganisms Formed on Polymer Materials, J. Phys.: Conf. Ser., vol. 1396, no. 1, Article ID 012015, 2019. DOI: 10.1088/1742-6596/1396/1/012015

3. Elinson, V.M. and Shchur, P.A., Study of the Surface of Antimicrobial Barrier Layers Based on Fluorocarbon and Carbon Films, High Temp. Mater. Process.: Int. Q. High-Technol. Plasma Process., vol. 26, no. 4, pp. 11-26, 2022. DOI: 10.1615/HighTempMatProc.2022043894

4. Elinson, V.M., Shchur, P.A., and Lyamin, A.N., Nanostructuring of the Polyethyleneterephthalate Surface Using Ion-Plasma Technology with the Help of Fluorine-Containing Gas Mixtures, High Temp. Mater.

5. Process.: Int. Q. High-Technol. Plasma Process., vol. 24, no. 3, pp. 173-182, 2020. DOI: 10.1615/HighTempMatProc.2020035843