Abstract
Two-dimensional (2D) perovskite light emitting diodes (LEDs) with violet emission were demonstrated with areal sizes in the centimeter scale. High-quality and uniform 2D BA2PbBr4 thin film was synthesized via combined thermal evaporation, spin-coating, and anti-solvent techniques. The perovskite film was authenticated by X-ray diffraction, scanning electron microscopy, and atomic force microscopy and exhibited high in crystallinity and morphology. The absorption spectrum fitted using Tauc plot revealed a bandgap of ∼3.0 eV, which agrees well with the photoluminescence spectrum. A p-i-n diode structure with a BA2PbBr4 active area of ∼2 cm2 was fabricated using LiF, TmPyPb, and PEDOT:PSS as the electron injection, electron, and hole transport layers, respectively. The device displayed a diode behavior with a turn-on voltage at 1.75 V and a saturation current of 65 mA cm−2. The electroluminescence of LEDs was centered at ∼406 nm with full width at half maximum of 13.6 nm, a color purity of 83.9%, and CIE coordinates of (0.18, 0.07). The optimum external quantum efficiency and luminance of 0.083% and 112 cd m−2 were achieved at current density of 59 mA cm−2. To our best knowledge, this investigation first realized 2D BA2PbBr4 perovskite LEDs with the shortest emission wavelength and high color purity in violet.
Funder
Ministry of Science and Technology, Taiwan
Publisher
The Electrochemical Society
Subject
Materials Chemistry,Electrochemistry,Surfaces, Coatings and Films,Condensed Matter Physics,Renewable Energy, Sustainability and the Environment,Electronic, Optical and Magnetic Materials
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献