DETERMINAÇÃO MULTIELEMENTAR EM AMOSTRAS DE BIODIESEL EMPREGANDO ESPECTROMETRIA DE FLUORESCÊNCIA DE RAIOS-X POR DISPERSÃO DE ENERGIA APÓS EXTRAÇÃO INDUZIDA POR QUEBRA DE EMULSÃO

Abstract

MULTI-ELEMENT DETERMINATION IN BIODIESEL SAMPLES USING ENERGY DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY AFTER EXTRACTION INDUCED BY EMULSION BREAKING. A method for determining Cd, Cr, Cu, and Fe in biodiesel samples is proposed using energy dispersive X-ray fluorescence spectrometry (EDXRF) after extraction induced by emulsion breaking (EIEB). A volume of 7.0 mL of biodiesel and an aliquot of 500 µL of Triton X-100 solution (2%, v v-1) prepared in nitric acid were used to prepare the emulsion. After 5 min of manual agitation, phase separation was performed by centrifugation for 5 min at 2000 rpm. A 100 µL aliquot of the enriched aqueous phase was collected and applied to the center of a filter paper. After drying, the analysis was performed directly on the paper using EDXRF. The detection limits were 60, 20, 30, and 60 μg kg-1 for Cd, Cr, Cu, and Fe, respectively. Recovery tests were performed by adding 450 μg kg-1 of the analytes in biodiesel samples, and the results varied between 87 and 113%. The procedure was applied to biodiesel samples, and the concentrations obtained for the four analytes were compared with those obtained by inductively coupled plasma optical emission spectrometry (ICP OES) after sample digestion.