Atomic Absorption Spectrometry as an Alternative to Determine the Presence of Gold Nanoparticles on or in Silica Matrix

Abstract

Two different gold-silica-based nanomaterials were prepared: (i) silica-supported gold nanoparticles (AuNP/SiO2); and (ii) gold-silica core-shell nanoparticles (AuNP@SiO2). Three strategies for sample treatment (S), consisting in acid treatments, were employed: (S1) HNO3; (S2) HNO3 + HCl; and (S3) HF + HNO3 + HCl, applying microwave oven digestion for S2 and S3. From three calibration curves, slope, intercept, and linear correlation coefficient were obtained. The accuracy of the methods was evaluated by comparing the gold contents in a sample determined by flame atomic absorption spectrometry (FAAS) and by inductively coupled plasma atomic emission spectrometry (ICP-OES). Finally, the amount of gold for all samples was determined by FAAS. UV-Vis spectroscopy and transmission electron microscopy (TEM) were used to compare the material before and after sample treatment. By comparison, the application of S2 and S3 allowed the presence of gold on or in the silica matrix to be determined and the amount quantified.