1. 1) H. Kihara, T. Kanazawa, H. Oba, S. Susei, S. Minamikata and S. Yamamoto, “Effect of notch size, angular distortion and residual stress on brittle fracture initiation characteristics of welded joints for high strength steels (The 1st report) : Experimental research for welded joint of 60 kg/mm”, Journal of the Society of Naval Architects of Japan, Vol. 125, pp. 255-274 (1969).
2. 2) H. Kihara, T. Kanazawa, H. Oba, S. Susei, S. Minamikata and S. Yamamoto, “Effect of notch size, angular distortion and residual stress on brittle fracture initiation characteristics of welded joints for high strength steels (The 2nd report) : Experimental research for welded joint of 80 kg/mm”, Journal of the Society of Naval Architects of Japan, Vol. 126, pp. 377-396 (1969).
3. 3) I. Milne, R. A. Ainsworth, A. R. Dowling and A. T. Stewart, “Assessment of the integrity of structures containing defects”, International Journal of Pressure Vessel and Piping, Vol. 32, Issues 1-4, pp. 3-104 (1988).
4. 4) Y. Mukai, M. Murata and E. J. Kim, “A proposal for stress intensity factor range calculation method by partial opening model of fatigue crack under weld residual stress field and prediction of the crack propagation behavior”, Quarterly Journal of the Japan Welding Society, Vol. 5, No. 2, pp. 269-272 (1987).
5. 5) K. Miyazaki and M. Mochizuki, “Effects of residual stress distribution and geometry of components on stress intensity factor and crack growth behavior of surface crack : evaluation of SCC growth under residual stress field (Report 2) ”, Quarterly Journal of the Japan Welding Society, Vol. 24, No. 1, pp. 78-86 (2005).