The Use of 3D Printed Sand Molds and Cores in the Castings Production-Reference-Cited by-同舟云学术

The Use of 3D Printed Sand Molds and Cores in the Castings Production

Published:2024-03-01 Issue: Volume: Page:
ISSN:2299-2944
Container-title:Archives of Foundry Engineering
language:pl
Short-container-title:

Author:

Halejcio Dawid¹^ORCID,Major-Gabryś Katarzyna¹^ORCID

Affiliation:

1. AGH University of Krakow, Faculty of Foundry Engineering Department of Moulding Materials, Mould Technology and Non-ferrous Metals al. A. Mickiewicza 30, 30-059 Krakow

Abstract

As a part of this work, an analysis of the current state of knowledge regarding the use of additive technology - binder jetting in the production of castings was made. The binder jetting (so-called 3D printing) has become the leading method of sand mold and core production. Within this paper types of molding and core sands with organic and inorganic binders that are and can be used in technology were analyzed. The need to carry out works aimed at developing pro-ecological molding / core sands with inorganic binders and organic binders with reduced harmfulness to the environment dedicated to binder jetting technology was noticed. The influence of technology parameters on the properties of molding / core sands and the properties of cast components was analyzed. It was shown that thanks to the unlimited shapes of the systems obtained with the use of additive technologies, it is possible to influence the rate of heat dissipation through the mold, which positively effects the process of solidification and crystallization of the castings.

Publisher

Polish Academy of Sciences Chancellery

Link

https://journals.pan.pl/Content/130419/PDF/AFE%201_2024_05.pdf

Reference1 articles.

1. [1] Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A. & Ul Haq, M.I. (2022). 3D printing – A review of processes, materials and applications in industry 4.0. Sustainable Operations and Computers. 3, 33-42. DOI: 0.1016/j.susoc.2021.09.004. [2] Shi, Y., Znang, J., Wen, S., Song, B., Yan, C., Wei, Q., Wu, J., Yin, Y., Zhou, J., Chen, R., Wei, Z., Jia, H., Yang, H & Nan, H. (2021). Additive manufacturing and foundry innovation. China Foundry. 18(4), 286-295. DOI: 10.1007/s41230-021-1008-8. [3] Gawronová, M., Lichý, P., Kroupová, I., Obzina, T., Beňo, Nguyenová, I., Merta, V., Jezierski, J. & Radkovský, F. (2022). Evaluation of additive manufacturing of sand cores in terms of the resulting surface roughness. Heliyon. 8(10), 1-10. DOI: 10.1016/j.heliyon.2022.e10751. [4] Shangguan, H., Kang, J., Deng, C., Hu, Y. & Huang, T. (2017). 3D-printed shell-truss sand mold for aluminum castings. Journal of Material Processing Technology. 250, 247-253. DOI: 10.1016/j.jmatprotec.2017.05.010. [5] Hawaldar, N. & Zhang, J. (2018) A comparative study of fabrication of sand casting mold using additive manufacturing and conventional proces. International Journal of Advanced Manufacturing Technology. 97(1-4), 1037-1045. DOI: 10.1007/s00170-018-2020-z. [6] Upadhyay, M., Sivarupan, T. & El Mansori, M. (2017). 3D printing for rapid sand casting - A review. Journal of Manufacturing Processes. 29, 211-220. DOI: 10.1016/j.jmapro.2017.07.017. [7] Zhang, Z., Wang, L., Zhang, L., Ma, P., Lu, B. & Du, C. (2021). Binder jetting 3D printing process optimization for rapid casting of green parts with high tensile strength. China Foundry. 18(4), 335-343. DOI: 10.1007/s41230-021-1057-z. [8] Thiel, J., Ravi, S. & Bryan,t N. (2017). Advancements in materials for three-dimensional printing of molds and cores. International Journal of Metalcasting. 11(1), 3-13. DOI: 10.1007/s40962-016-0082-y. [9] Mitra, S., Rodríguez de Castro A. & el Mansori, M. (2018). The effect of ageing process on three-point bending strength and permeability of 3D printed sand molds. International Journal of Advanced Manufacturing Technology. 97(1-4), 1241-1251, DOI: 10.1007/s00170-018-2024-8. [10] Major-Gabryś, K., Hosadyna–Kondracka, M., Polkowska A., Warmuzek M. (2022). Effect of the biodegradable component addition to the molding sand on the microstructure and properties of ductile iron castings. Materials. 15(4), 1-14, DOI: 10.3390/ma15041552. [11] Major-Gabryś, K. (2019) Environmentally friendly foundry molding and core sands. Journal of Materials Engineering and Performance. 28(7), 3905-3911, DOI: 10.1007/s11664-019-03947-x. [12] Puzio, S., Kamińska, J., Major-Gabryś, K., Angrecki, M. & Hosadyna-Kondracka, M. (2019). Microwave-hardened moulding sands with hydrated sodium silicate for modified ablation casting. Archives of Foundry Engineering. 19(2), 91-96, [13] Major-Gabryś, K., Grabarczyk, A. & Dobosz, St.M., (2018). Modification of foundry binders by biodegradable material. Archives of Foundry Engineering. 18(2), 31-44, DOI: 10.24425/122498. [14] Major-Gabryś, K., Grabarczyk, A., Dobosz, St.M. & Jakubski, J. (2016). New bicomponent binders for foundry moulding sands composed of phenol-furfuryl resin and polycaprolactone. Metalurgija. 55(3), 385-387. [15] Major-Gabryś, K. (2016). Odlewnicze masy formierskie i rdzeniowe przyjazne dla środowiska. Katowice-Gliwice: Archives of Foundry Engineering. (in Polish) [16] Major-Gabryś, K., Stachurek, I. & Hosadyna-Kondracka, M. (2022). The influence of biomaterial in a binder composition on biodegradation of waste from furan moulding sands. Archives of Foundry Engineering. 22(2), 17-24, DOI: 10.24425/afe.2022.140.222 [17] Major-Gabryś, K., Hosadyna-Kondracka, M., Skrzyński, M. & Stachurek, I. (2022). The influence of biomaterial in the binder composition on the quality of reclaim from furan no-bake sands. Archives of Civil Engineering. 68(4), 163-177, DOI: 10.2445/ace.2022.143032. [18] Major-Gabryś, K., Stachurek, I., Hosadyna-Kondracka, M. & Homa, M. (2022). The influence of polycaprolactone on structural changes of dusts from molding sands with resin-based binder before and after the biodegradation process. Polymers. 14(13), 1-16. DOI: 10.3390/polym14132605. [19] Snelling, D., Williams, C. & Druschitz, A. (2014). A comparison of binder burnout and mechanical characteristics of printed and chemically sand molds. In 2014 International Solid Freeform Fabrication Symposium. University of Texas at Austin. [20] Dana, H.R. & el Mansori, M. (2020). Mechanical characterisation of anisotropic silica sand/furan resin compound induced by binder jet 3D additive manufacturing technology. Ceramics International. 46(11), 17867-17880, DOI: 10.1016/j.ceramint.2020.04.093. [21] Coniglio, N., Sivarupan, T. & el Mansori, M. (2018). Investigation of process parameter effect on anisotropic properties of 3D printed sand molds. International Journal of Advanced Manufacturing Technology. 94(5-8), 2175-2185. DOI: 10.1007/s00170-017-0861-5. [22] Sivarupan, T., el Mansori, M., Daly, K., Mavrogordato, M.N. & Pierron, F. (2019) Characterisation of 3D printed sand moulds using micro-focus X-ray computed tomography. Rapid Prototyping Journal. 25(2), 404-416. DOI: 10.1108/RPJ-04-2018-0091. [23] Cheng, Y., Li, Y., Yang, Y., Tang, K., Jhuang, F., L,i K. & Lu, C. (2022). Greyscale printing and characterization of the binder migration pattern during 3D sand mold printing. Additive Manufacturing. 56, 102929. DOI: 10.1016/j.addma.2022.102929. [24] Vaezi, M. & Chua, C.K. (2011). Effects of layer thickness and binder saturation level parameters on 3D printing proces. International Journal of Advanced Manufacturing Technology. 53(1-4), 275-284. DOI: 10.1007/s00170-010-2821-1. [25] Bryant, N., Frush, T., Thiel, J., MacDonald, E. & Walker, J. (2021). Influence of machine parameters on the physical characteristics of 3D-printed sand molds for metal casting. International Journal of Metalcasting. 15(2), 361-372. DOI: 10.1007/s40962-020-00486-3. [26] Hackney, P.M. & Wooldridge, R. (2017). Characterisation of direct 3D sand printing process for the production of sand cast mould tools. Rapid Prototypin Journal. 23(1), 7-15. DOI: 10.1108/RPJ-08-2014-0101. [27] Wang, Y., long Yu, R., kui Yin, S., Tan, R. & chun Lou, Y. (2021). Effect of gel time of 3D sand printing binder system on quality of sand mold/core. China Foundry. 18(6), 581-586. DOI: 10.1007/s41230-021-1085-8. [28] Sama, S.R., Badamo, T. & Manogharan, G. (2020). Case studies on integrating 3D sand-printing technology into the production portfolio of a sand-casting foundry. International Journal of Metalcasting. 14(1), 12-24. DOI: 10.1007/s40962-019-00340-1. [29] Triantaphyllou, A., Giusca, C., Macaulay, G., Reorig, F., Hoebel, M., Leach, R., Tomita, B. & Milne, K. (2015). Surface texture measurement for additive manufacturing. Surfdace Topografy: Metrology and Properties. 3(2), 024002. DOI: 10.1088/2051-672X/3/2/024002. [30] Hartmann, C., van den Bosch, L., Spiegel, J., Rumschöttel, D. & Günther, D. (2022). Removal of stair-step effects in binder jetting additive manufacturing using grayscale and dithering-based droplet distribution. Materials. 15(11), 1-17. DOI: 10.3390/ma15113798. [31] Deng, C., Kang, J., Shangguan, H., Huang, T., Zhang, X., Hu, Y. & Huang, T. (2018). Insulation effect of air cavity in sand mold using 3D printing technology. China Foundry. 15(1), 37-43. DOI: 10.1007/s41230-018-7243-y. [32] Shangguan, H., Kang, J., Yi, J., Zhang, X., Wang, X., Wang, H. & Huang, T. (2018). The design of 3D-printed lattice-reinforced thickness-varying shell molds for castings. Materials. 11(4), 1-10. DOI: 10.3390/ma11040535. [33] Wei, X., Wan, Y. & Liang, X. (2022). Effect of hollow core on cooling temperature in 3D printing. Journal of Physics: Conference Series. Institute of Physics. 2396, 012037, 1-9. DOI: 10.1088/1742-6596/2396/1/012037. [34] ben Saada, M. & el Mansori, M. (2021). Assessment of the effect of 3D printed sand mold thickness on solidification process of AlSi13 casting alloy. The International Journal of Advanced Manufacturing Technology. 114, 1753-1766. DOI: 10.1007/s00170-021-06999-3. [35] Sama, S.R., Wang, J. & Manogharan, G. (2018). Non-conventional mold design for metal casting using 3D sand-printing. Journal of Manufacturing Processes. 34, 765-775. DOI: 10.1016/j.jmapro.2018.03.049. [36] Sama, S.R., Badamo, T., Lynch, P. & Manogharan, G. (2019). Novel sprue designs in metal casting via 3D sand-printing. Additive Manufacturing. 25, 563-578. DOI: 10.1016/j.addma.2018.12.009. [37] Martinez, D., King, P., Sama, S.R., Sim, J., Toykoc, H. & Manogharan, G. (2023). Effect of freezing range on reducing casting defects through 3D sand-printed mold designs. International Journal of Advanced Manufacturing Technology. 126(1-2), 569-581. DOI: 10.1007/s00170-023-11112-x. [38] Shuvo, M.M. & Manogharan, G. (2021). Novel riser designs via 3D sand printing to improve casting performance. Procedia Manufacturing. 53, 500-506. DOI: 10.1016/j.promfg.2021.06.052. [39] Snelling, D., Williams, C. & Druschitz, A. (2019). Mechanical and material properties of castings produced via 3D printed mold. Additive Manufacturing. 27, 199-207, DOI: 10.1016/j.addma.2019.03.004. [40] Hernández, F. & Fragoso, A. (2022). Fabrication of a stainless-steel pump impeller by integrated 3D sand printing and casting: mechanical characterization and performance study in a chemical plant. Applied Sciences (Switzerland). 12(7), 3539. DOI: 10.3390/app12073539. [41] Szymański, P. & Borowiak, M. (2019). Evaluation of castings surface quality made in 3D printed sand moulds using 3DP technology. Lecture Notes in Mechanical Engineering. 201-212. DOI: 10.1007/978-3-030-16943-5_18. [42] Skorulski, G. (2016). 3DP Technology for the manufacture of molds for pressure casting. Archives of Foundry Engineering. 16(3), 9-102. DOI: 10.1515/afe-2016-0058. [43] Na, O., Kim, K. & Lee. H. (2021). Printability and setting time of csa cement with na2 sio3 and gypsum for binder jetting 3D printing. Materials. 14(11), 1-18. DOI: 10.3390/ma14112811. [44] Zhang, L., Yang, X., Ran, S. Zhang, L., Hu, C. & Wang, H. (2023). Water-soluble sand core made by binder jetting printing with the binder of potassium carbonate solution. International Journal of Metalcasting. 1-12. DOI: 10.1007/s40962-022-00940-4. [45] Goto, I., Kurosawa, K. & Matsuki, T. (2022). Effect of 3D-printed sand molds on the soundness of pure copper castings in the vicinity of as-cast surfaces. Journal of Manufacturing Processess. 77, 329-338. DOI: 10.1016/j.jmapro.2022.03.020. [46] Castro-Sastre, M.Á., García-Cabezón, C., Fernández-Abia, A.I., Martín-Pedrosa, F. & Barreiro, J. (2021). Comparative study on microstructure and corrosion resistance of Al-Si alloy cast from sand mold and binder jetting mold. Metals (Basel). 11(9), 1421. DOI: 10.3390/met11091421. [47] Kuchariková, L., Liptáková, T., Tillová, E., Kajánek, D., Schmidová, E. (2018). Role of chemical composition in corrosion of aluminum alloys. Metals. 8(8), 581. DOI: 10.3390/met8080581. [48] Samuel, A.M., Doty, H.W., Valtierra, S. & Samuel, F.H. (2018). βAl5FeSi phase platelets-porosity formation relationship in A319.2 type alloys. International Journal of Metalcasting 12, 55-70. DOI: 10.1007/s40962-017-0136-9. [49] Zheng, J., Chen, A., Yao, J., Ren, Y., Zheng, W., Lin, F., Shi, J., Guan, A. & Wang, W. (2022). Combination method of multiple molding technologies for reducing energy and carbon emission in the foundry industry. Sustainable Materials and Technologies. 34, e00522. DOI: 10.1016/j.susmat.2022.e00522. [50] Kang, J. & Ma, Q. (2017). The role and impact of 3D printing technologies in casting. China Foundry. 14(3), 157-168. DOI: 10.1007/s41230-017-6109-z.