Author:
Vyhovskyi Heorhii,Balytska Nataliia,Plysak Mykola,Otamanskyi Valentyn
Abstract
The feasibility of using face milling for the final formation of the parts surface layer is confirmed by a large number of scientific works. At the same time, there are significant advantages of technological processes using face mills for oblique cutting, equipped with superhard materials, with a spiral-stepped arrangement of cutting inserts. This work is devoted to the study of the influence of the inclination angle of the oblique face mill cutting edge on the cutting forces when processing the workpiece flat surface made of gray cast iron and carbon tool steel using the Deform-3D program. The influence of the cutting edge inclination in the range from 0 to -45º on the smoothness of penetration of the face mill inserts into the workpiece is discussed.
Publisher
Ternopil Ivan Puluj National Technical University
Subject
Psychiatry and Mental health
Reference34 articles.
1. 1. Stephenson D. A., Agapiou, J. S. Metal cutting theory and practice. CRC Press, 2016, 931 p.
2. 2. Grzesik W. Machining of hard materials. In: Machining, Springer, London, 2008. P. 97-126.
3. 3. Uhlmann E., Sammler F., Barry J., Fuentes J., Richarz S. Superhard Tools. In: Laperrière, L., Reinhart, G. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg, 2014. P. 1183-1188.
4. 4. Vyhovskyi H. M. Pidvyshchennia pratsezdatnosti tortsevykh frez dlia chystovoi obrobky ploskykh poverkhon. Diss. kand. tek. nauk. Kyiv, 2000. 16 p. [In Ukrainian].
5. 5. Hlembotska L., Melnychuk P., Balytska N., Melnyk O. Modelling the loadyng of the nose-free cutting edges of face mill with a spiral-stepped arrangement of inserts, Eastern-European Journal of Enterprise Technologies. Vol. 9. No. 1. P. 46-54.