Author:
Singh Rachit,Sinha Krishnendu
Abstract
High-speed turbulent flow in hypersonic intakes encounters flow-separation due to shockboundary layer interaction. Presence of separation bubble changes the pressure distribution over the surface which can lead to deterioration of aerodynamic performance of intake and thus jeopardize the stability of vehicle. In this study, we employ the physics-based shock-unsteadiness k-e model to compute separation bubble size in a mixed compression two-ramp intake. The design point Mach number of 6 at 30 km altitude with zero angle of attack is considered. Changes in separation bubble length is analyzed at different off-design conditions by varying the flight Mach number, angle of attack and cruise altitude. The changes observed in the separation length by variation of above flight parameters is studied in terms of the physically relevant canonical parameters of upstream Mach number, Reynolds number Red and the ratio of wall to recovery temperature. CFD simulations are performed for the entire range of canonical and flight parameters. Wall-to-recovery-temperature ratio is found to be an important governing parameter for separation length studies. The largest shock-induced separation is observed for the case of off-design flight Mach number of 8. The corresponding effect on the lift and drag generated by the hypersonic intake are quantified.
Reference26 articles.
1. Marini Marco., "Effects of Flow and Geometry Parameters on Shock-wave Boundary-layer Interaction Phenomena", 8th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, 1998.
2. Verma, S. B. and Hadjadj, A., "Supersonic Flow Control", Shock Waves 25, 2015, pp.443-449.
3. Babinsky Holger and John K. Harvey., Eds. "Shock Wave-boundary-layer Interactions", Vol.32. Cambridge University Press, 2011.
4. Gaitonde Datta, V., "Progress in Shock Wave/Boundary Layer Interactions", 3rd AIAA Fluid Dynamics Conference, 2013.
5. Pasha Amjad Ali., "Study of Parameters Affecting Separation Bubble Size in High Speed Flows Using k-w Turbulence Model", Journal of Applied and Computational Mechanics, 4.2, 2018, pp.95-104.