Author:
Danish Md. Meraj,Srivastava Shobhit
Abstract
It is possible to build physical models, prototypes, components, tools, and functioning parts from 3D data created using a computer (CAD), with sophisticated geometry, using Additive Manufacturing - AM, which is difficult or impossible to perform with traditional manufacturing methods. Metals, ceramics, and polymers in the form of liquids, powders, wire, foil, and other materials are used in AM techniques to create prototypes. However, there are several constraints, the most significant of which being the material selection. As a result, it is critical to understand material qualities and how machine settings affect them, especially if the machine is producing functioning components. The influence of component placement (X and Y direction) in the build on the dimensional accuracy and mechanical qualities of parts produced by this SLS method will be investigated in this research.
Reference12 articles.
1. Liu, X., Li, J., Li, Y., Li, J. and Li, R., " Multi-objective Optimization of Selective Laser Sintering Process Parameters Using a Hybrid Genetic Algorithm", Journal of Manufacturing Systems, Vol.63, 2023, pp.448-457.
2. Kozior, T., Döpke, C., Grimmelsmann, N., Junger, I. J. and Ehrmann, A., "Influence of Fabric Pre-treatment on Adhesion of Three-dimensional Printed Material on Textile Substrates", Advances in Mechanical Engineering, Vol.10, 2018, pp.1-8.
3. Bochnia, J. and Blasiak, S., "Fractional Relaxation model of Materials Obtained with Selective Laser Sintering Technology", Rapid Prototyping Journal, Vol.25, 2018. pp.76- 86.
4. Fafenrot, S., Grimmelsmann, N., Wortmann, M. and Ehrmann, A., "Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling, Materials (Basel)", Vol.10, 2017, pp.1-14.
5. Kozior, T. and Kundera, Cz., "Evaluation of the Influence of Parameters of FDM Technology on the Selected Mechanical Properties of Models", Procedia Engineering, Vol.192, 2017, pp.463-468.