S&R analysis and optimization of automotive door interior panels considering pre-compression based on BP software-Reference-Cited by-同舟云学术

S&R analysis and optimization of automotive door interior panels considering pre-compression based on BP software

Published:2023-09-21 Issue: Volume:50 Page:138-144
ISSN:2345-0533
Container-title:Vibroengineering Procedia
language:en
Short-container-title:Vib. proced.

Author:

Mou Yajun,Li Peiran,Li Tianyi,Qiu Bin,Jiang Dayong

Abstract

Squeak and Rattle (S&R) of automotive door panels seriously affect consumers' perception of vehicle quality. In order to accurately analyze the S&R problem, BP software was used to build an S&R analysis finite element model of the interior assembly of the door interior, taking into account the pre-compression between the interior door panel and the sheet metal during installation. The excitation transmitted from the body to the door through the hinge is tested, and the modal transient analysis of the model is carried out by BP software. Combined with the S&R noise risk assessment standard, the analysis results were evaluated, and the S&R points were determined. Through the bench test, it is verified that the test risk points are consistent with the analysis results, indicating the accuracy of the S&R simulation analysis. Based on the modal contribution, the S&R risk points are optimized and analyzed. Through optimization analysis, the abnormal noise risk is reduced. The results show that in the digital model design stage, the door panel S&R risk analysis based on BP software can be carried out for abnormal noise risk prediction and optimization analysis, that greatly saves development time and reduces development costs.

Publisher

JVE International Ltd.

Subject

General Medicine

Link

https://www.extrica.com/article/23489/pdf

Reference10 articles.

1. X. J. Ren, Liu and C. Shen, “Research of detection method of automobile interior parts squeak and rattle,” Shanghai Auto, Vol. 297, No. 5, pp. 7–10, 2015. https://doi.org/10.3969/j.issn.1007-4554.2015.05.02

2. X. Jiang and D. P. Qiu, “Improvement of the acoustic performance of vehicle plastic interior parts,” Automotive Engineer, Vol. 252, No. 4, pp. 31–34, 2018, https://doi.org/10.3969/j.issn.1674-6546.2018.04.008

3. Y. Peng, D. Q. Li, and H. Zhang, “Research on abnormal noise control of automobile interior parts,” Automobile Applied Technology, Vol. 46, No. 20, pp. 71–76, 2021.

4. Q. Li, X. D. Gu, G. B. Chang, S. Y. Li, and Y. Yu, “Simulation and optimization of vehicle interior abnormal sound based on SnRD,” Sci-Tech and Development of Enterprise, No. 8, pp. 51–53, 2021, https://doi.org/10.3969/j.issn.1674-0688.2021.08.017

5. Y. C. Li, J. C. Liu, X. D. Gu, Y. L. Wang, and G. B. Chang, “The application of MSA in the S&R simulation of vehicle interior,” Auto Time, No. 2, pp. 7–11, 2021, https://doi.org/10.3969/j.issn.1672-9668.2021.02.002