An optimal design and improved processing technology for the rose-bow titanium alloy spring of subway pantograph-Reference-Cited by-同舟云学术

An optimal design and improved processing technology for the rose-bow titanium alloy spring of subway pantograph

Published:2022-04-21 Issue: Volume:41 Page:173-179
ISSN:2345-0533
Container-title:Vibroengineering PROCEDIA
language:en
Short-container-title:Vib. proced.

Author:

Huang Zhihui,Song Yangfa,Tang Jiacheng

Abstract

The traditional low-alloy steel rose-bow spring of subway pantograph is easily occurred the corrosion and fracture after being used for a central period of time, which interrupts the train current collection and cannot provide power for the train, as a result of the interruption of the normal operation of subway trains. Therefore, an optimal design and improved processing technology for the rose-bow titanium alloy spring of subway pantograph was studied in this paper. The heat treatment tests on the two titanium alloy springs, made of TC18 and TB6 materials, were conducted respectively. The improved process flow of the rose-bow titanium alloy spring was also determined. Fatigue test results show that both TC18 and TB6 titanium alloy springs of pantograph can meet the corresponding requirements.

Publisher

JVE International Ltd.

Subject

General Medicine

Link

https://www.jvejournals.com/article/22546/pdf

Reference15 articles.

1. C. Y. Wang and W. J. Xi, “Investigation on notch sensitivity of TC18 titanium alloy,” Rare Metal Materials and Engineering, Vol. 41, No. 4, pp. 663–666, 2012.

2. Z. H. Huang, C. Wang, L. S. Sun, and J. Zhou, “Application prospect of titanium alloy materials in rail transit,” (in Chinese), Electric Drive for Locomotives, Vol. 254, No. 1, pp. 14–16, 2017.

3. Z. H. Huang, H. J. Zhang, and Y. P. Sun, “Design of primary spring for three-axle bogie,” (in Chinese), Electric Drive for Locomotives, Vol. 191, No. 4, pp. 36–37, 2005.

4. Z. H. Huang et al., “Discussing on dynamic load coefficient of locomotive’s first spring,” (in Chinese), Electric Drive for Locomotives, Vol. 214, No. 3, pp. 39–41, 2009.

5. H. Hao et al., “Research on the technics of aging treatment for blade spring,” (in Chinese), Vacuum and Cryogenics, Vol. 19, No. 1, pp. 30–35, 2013.