Influence of the type of fastening of the slope of hydrotechnical structures on the reduction of the cost of their construction-Reference-Cited by-同舟云学术

Influence of the type of fastening of the slope of hydrotechnical structures on the reduction of the cost of their construction

Published:2022-10-18 Issue:3 Volume:12 Page:56-61
ISSN:2782-2109
Container-title:Urban construction and architecture
language:
Short-container-title:Urban construction and architecture

Author:

Mikhasek Andrey A.,Rodionov Maksim V.,Gorbunov Sergey K.

Abstract

In the field of fixing the slopes of hydraulic structures in the conditions of wave impacts, the world construction industry has accumulated considerable experience. The article considers four types of slope mounting plates: reinforced concrete slabs, gabions, concrete-filled mats and fasteners made of coarse-pored concrete (crushed stone and recycled broken concrete). The article is devoted to the feasibility study of the most common types of fastening of slopes of hydraulic structures. When performing the justification, the following fastening characteristics were taken into account: the thickness of the fastening from the condition of ensuring their stability, the boundaries of the fastening, the cost of resources for the device of one square meter of fastening. The most significant results of the study are the obtaining of technical and economic indicators of a new type of fastening plates and their comparison with other options.

Publisher

Samara State Technical University

Reference16 articles.

1. Shaytan V. S. Rekomendatsii po proyektirovaniyu zhelezobetonnykh i kamennonabrosnykh krepleniy otkosov zemlyanykh sooruzheniy i beregov vnutrennikh vodoyemov [Recommendations for the design of reinforced concrete and rockfill fastenings for slopes of earthworks and banks of inland waters]. Moscow, 1979. 184 p.

2. Engineering in the Water Environment Good Practice Guide. Bank Protection: Rivers and Lochs (2021). Available at: https://www.sepa.org.uk/media/150971/wat_sg_23.pdf (accessed 3 December 2021).

3. Mikhasek A., Ivanov B. Modified composite material developed on the basis of no-fines asphalt concrete. MATEC Web of Conferences, 2017, Vol.106, article number 03022. Available at: https://doi.org/10.1051/matecconf/201710603022 The possibility of using materials based on secondary gravel in civil construction_/_MATEC Web of Conferences 106, 04018.

4. Dyshko E. I., Krasnozhon G. F. Ukazaniya po proektirovaniyu gidrotekhnicheskih sooruzhenij, podverzhennyh volnovym vozdejstviyam. SN 288-64 [Building codes SN 288-64 Guidelines for the design of hydraulic structures affected by wave effects]. Moscow, Stroyizdat Publ., 1965. 133 p.

5. Shabanov A. D., Shabanov V. A., Shabanov L. A., Kichigina N. YA. Raschet zhelezobetonnykh plit krepleniya napornykh otkosov zemlyanykh sooruzheniy [Calculation of reinforced concrete slabs for fastening pressure slopes of earthworks]. Saratov, Saratovskiy Univ., 1987. 139 p.