Scattering of Low-Mode Internal Waves at Finite Isolated Topography

Abstract

Abstract A series of two-dimensional numerical simulations examine the breaking of first-mode internal waves at isolated ridges, independently varying the relative height of the topography compared to the depth of the ocean h0/H0; the relative steepness of the topographic slope compared to the slope of the internal wave group velocity γ; and the Froude number of the incoming internal wave Fr0. The fraction of the incoming wave energy, which is reflected back toward deep water, transmitted beyond the ridge, and lost to dissipation and mixing, is diagnosed from the simulations. For critical slopes, with γ = 1, the fraction of incoming energy lost at the slope scales approximately like h0/H0, independent of the incoming wave Froude number. For subcritical slopes, with γ < 1, waves break and lose a substantial proportion of their energy if the maximum Froude number, estimated as Frmax = Fr0/(1 − h0/H0)2, exceeds a critical value, found empirically to be about 0.3. The dissipation at subcritical slopes therefore increases as both incoming wave Froude number and topographic height increase. At critical slopes, the dissipation is enhanced along the slope facing the incoming wave. In contrast, at subcritical slopes, dissipation is small until the wave amplitude is sufficiently enhanced by the shoaling topography to exceed the critical Froude number; then large dissipation extends all the way to the surface. The results are shown to generalize to variable stratification and different topographies, including axisymmetric seamounts. The regimes for low-mode internal wave breaking at isolated critical and subcritical topography identified by these simulations provide guidance for the parameterization of the mixing due to radiated internal tides.