INVESTIGATION OF THE INFLUENCE OF PREHEATING ON THE STRUCTURE AND PROPERTIES TRANSITION ZONE BETWEEN HARDFACED WEAR-RESISTANT ALLOY AND 55NICRMOV5 STEEL-Reference-Cited by-同舟云学术

INVESTIGATION OF THE INFLUENCE OF PREHEATING ON THE STRUCTURE AND PROPERTIES TRANSITION ZONE BETWEEN HARDFACED WEAR-RESISTANT ALLOY AND 55NICRMOV5 STEEL

Published:2021-02-25 Issue:2(249) Volume: Page:59-64
ISSN:1990-5297
Container-title:IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY
language:
Short-container-title:IZVESTIA VGTU

Author:

Fastov S. A.¹,Zorin I. V.¹,Lysak V. I.¹,Murugov D. A.¹

Affiliation:

1. Volgograd State Technical University

Abstract

The results of the experimental studies hardfacing of the 55NiCrMoV5 die steel of the three types of wear and heat-resistant alloys with preheating are presented. The effect of the preheating on the structure hardfaced alloys as well as on the heat affected zone formation of the base metal is estimated. It is revealed that the use of preheating under the considered conditions of surfacing causes the formation of a structural heterogeneity of the heat-affected zone of the base metal, which manifests itself as a variable distribution of chromium and molybdenum.

Funder

Russian Foundation for Basic Research

Publisher

Volgograd State Technical University

Subject

General Medicine

Link

http://www.vstu.ru/nauka/izdaniya/doi/10.35211_1990-5297-2021-2-249-59-64.pdf

Reference21 articles.

1. Соколов, Г. Н. Наплавка износостойких сплавов на прессовые штампы и инструмент для горячего деформирования сталей : монография / Г. Н. Соколов, В. И. Лысак. - Волгоград : ВолгГТУ, 2005. - 284 с.

2. Бабинец, А. А. Исследование термической стойкости наплавленного металла, предназначенного для восстановления прокатных валков / А. А. Бабинец, И. А. Рябцев, И. А. Кондратьев, И. И. Рябцев, Г. Н. Гордань // Автоматическая сварка. - 2014. - № 5. - С. 17-21.

3. Kashani H., Amadeh A., Vatanara M. R., Improvement of wear resistance of hot working tool steel by hardfacing. Part 2 - case study // Material science and technology. - 2008. - Vol. 24 - № 3. - С. 356-360.

4. Тылкин, М. А. Штампы для горячего деформирования металлов / М. А. Тылкин, Д. И. Васильев, А. М. Рогалев. - М. : Высшая школа, 1977. - 496.

5. Фрумин, И. И. Технология механизированной наплавки / И. И. Фрумин, Ю. А. Юзвенко, Е. И. Ленайчук. - М. : Высшая школа, 1964. - 304 с.