Abstract
In this study, in order to optimize the quality criteria of the machined surface based on the Archimedean spiral, the relieving grinding process (RGP) was performed to machine the material of HSS P18 in a 1Б811 machine with four input parameters including graininess of grinding wheel (G), grinding wheel hardness (Hd), velocity of grinding wheel (V), and feed rate (s) and with three quality criteria including surface roughness (Ra), hardening of surface layer (∆HRC), and hardened layer thickness (∆L). Taguchi-AHP-Topsis method was successfully applied to solve the Multi-Criteria Decision Making (MCDM) problem in this case. The optimized results of the output parameters are surface roughness of 0.21 µm, surface hardening of 1.45 HRC, and hardened layer thickness of 34.18 µm. These results were determined at the set of the input parameters includes G, V, s with their values of 120, 24 m/s, 2.08 m/min, respectively, and Hd at level 1. The optimal results were verified through the comparison between the calculated and the experimental results using this set of optimal parameters. The differences between the calculated results and the experimental results were quite small (maximum different value was 4.8 %) Thus, the results of this study can be applied to solve the multi-objective optimization problems in RGP of the GMT surface based on the Archimedean spiral
Subject
General Physics and Astronomy,General Engineering
Reference37 articles.
1. Ohashi, K., Tan, K., Ashida, T., Tsukamoto, S. (2015). Quick On-Machine Measurement of Ground Surface Finish Available for Mass Production Cylindrical Grinding Processes. International Journal of Automation Technology, 9 (2), 176–183. doi: https://doi.org/10.20965/ijat.2015.p0176
2. Liu, T., Deng, Z., Lv, L., She, S., Liu, W., Luo, C. (2020). Experimental Analysis of Process Parameter Effects on Vibrations in the High-Speed Grinding of a Camshaft. Strojniški Vestnik – Journal of Mechanical Engineering, 66 (3), 175–183. doi: https://doi.org/10.5545/sv-jme.2019.6294
3. Kopac, J., Krajnik, P., d’Aniceto, J. M. (2005). Grinding analysis based on the matrix experiment. 13th International scicentific conference on achivements in mechanical and materials engineering, 331–334. Available at: http://jamme.acmsse.h2.pl/papers_amme05/1422.pdf
4. Krajnik, P., Sluga, A., Kopac, J. (2006). Radial basis function simulation and metamodelling of surface roughness in centreless grinding. Journal of Achievements in Materials and Manufacturing Engineering, 14 (1-2), 104–110. Available at: https://www.infona.pl/resource/bwmeta1.element.baztech-022f5b63-f12b-42cd-824b-35e165787e0a/tab/summary
5. Siddiquee, A. N., Khan, Z. A., Mallick, Z. (2009). Grey relational analysis coupled with principal component analysis for optimisation design of the process parameters in in-feed centreless cylindrical grinding. The International Journal of Advanced Manufacturing Technology, 46 (9-12), 983–992. doi: https://doi.org/10.1007/s00170-009-2159-8
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献