SELECTED PROPERTIES OF COMPREGNATED WOOD USING LOW MOLECULAR WEIGHT PHENOL FORMALDEHYDE AND SUCCINIC ANHYDRIDE

Abstract

The aim of this study was to investigate the effect of impregnating materials (low molecular weight phenol formaldehyde or LmwPF and succinic anhydride or SA), their concentrations (5and 10%), and compression ratios (20 and 40% from initial thickness)on improvement of specific gravity (SG) and dimensional stability on nyatoh, sepetir, and pisang putih wood; and then compared them to control and densified wood. The results showed that SG and dimensional stability of compregnated wood were affected by all parameters studied. Higher compression ratio and concentration will result in a greater improvement.In general, SG and dimensional stability of compregnated wood were better than the control.SG of LmwPF-and SA-compregnated wood increased by 10.69‒22.31% and 6.96‒23.09%, respectively. Utilization of LmwPF and SA has significantly reduced the spring-back, butthe latter is better. Thecompression-set recovery after compregnation was 18.34‒33.99%, while after densification was 47.86‒71.49%.