Mesopic Photometry and Street Lighting

Abstract

The article reveals the question of achieving security for people on the streets at night with the help of artificial lighting. The author analyzed the factors affecting traffic safety and the possibility of creating the necessary visual conditions for this by means of street lighting. In addition, the article raised an important question regarding the characteristics of the roadway. It is noted that the modern pavement is not standardized on the lighting characteristics. Knowing the spectral characteristics of the applied light sources, these data could be applied in the development of new types of canvases that would allow achieving a new level of illumination in terms of both improving the quality and its efficiency and economy. Without this, it is impossible to talk about the maximum efficiency of the use of the luminous flux as a whole. For existing lighting systems, the brightness calculation is performed by measuring the illumination and reflectivity of the road surface. The obtained brightness values are entered into the mesopic photometric system in order to determine the parameters of the complete system, which provides equivalent visual perception of the illuminated objects and is intended to replace the existing installation. To determine the required lamp power when replacing existing luminaires, it is recommended to use a mesopic photometric system, which allows you to perform calculations taking into account the S/P ratios. In this regard, it is necessary to thoroughly review the computer programs used in the creation of the lighting project, as well as to ensure active participation in international cooperation in the formation of modern lighting standards.