Abstract
" Aluminum-titanium compounds (Ti3Al, TiAl and Al3Ti) were identified as materials for high temperature applications in areas like automotive industry, materials for aircrafts or filter materials used at high temperatures and in corrosive environments. From these compounds, Al3Ti has a low density and good resistance to the oxidation especially in air. This compound was obtained in the form of porous material by reactive sintering starting from elementar powders. The powder mixture was pressed at 500 MPa, and, the sintering took place at a temperature of 700 °C, for 30 minutes under vacuum. Following the reaction only the Al3Ti compound was formed. The obtained samples had a pore size distribution in the 3-100 μm range."
Publisher
Academia de Stiinte Tehnice in Romania
Reference12 articles.
1. "[1]. Clemens H., Kestler H., Processing and applications of intermetallic γ - TiAl - based alloys, Adv Eng Mat, 2, 2000; p. 551- 560
2. [2]. Zaghal S, Thomas M, Naka S, Finel A, Couret A., Phase transformations in TiAl based alloys, Acta Mater, 53, 2005, p. 2653-2664.
3. [3]. Wu Y, Hwang Sk., Microstructural refinement and improvement of mechanical properties and, oxidation resistance in EPM TiAl - based intermetallics with yttrium addition, Acta Materiallia, 50, 2002p. 1479-1493.
4. [4]. Mehra P.D., Effect of mechanical milling and current intensity on the electrically activated combustion synthesis of titanium aluminides, PhD Thesis, San Diego State University, 2013
5. [5]. Kupp D., Claar D., Flemming K., Waag U., Goehler H., Novel Techniques for the fabrication of titanium aluminide thermal protection systems (TPS) for aerospace applications, Adv Powd Metall Particulate Mat., 2, 2002, p. 133-139.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. The effect of additives on the properties of crude oil;Journal of Engineering Sciences and Innovation;2021-05-17