Computation of AC loss of HTS coils wound by coated conductors with different widths

Abstract

The second-generation high-temperature superconductor (HTS) tape is a promising material for the HTS application. However, the extremely large aspect ratio of the HTS coated tape leads to high power dissipation in the environment of a time-varying magnetic field. Reducing the width of HTS coated tape is a feasible way to decrease the alternating current (AC) loss of devices composed of HTS tapes. In this study, a numerical model of the HTS coil group composed of six sub-coils based on the T-A formulation is presented in which each HTS sub-coil is wound with original or narrow width Y-Ba-Cu-O (YBCO) tape. The 1/3 and 1/4 narrow width tapes are used to represent the tapes, which are divided into three and four equal parts, respectively. Then, we calculate the AC losses in 1/3 and 1/4 narrow width HTS coil groups in different cases. The estimated results of AC loss are compared with those of the HTS coil group wound by HTS tapes with original width. The numerical results show that AC transport losses of 1/3 and 1/4 narrow width HTS coil groups are smaller than that of the original HTS coil group for the applied high current. Furthermore, with the decrease in tape width, the reduction of AC loss becomes more significant. In contrast with the original width HTS coil group, the magnetization losses of the 1/3 and 1/4 narrow width HTS coil groups will decrease at the high magnetic field. In addition, the influences of harmonic components on AC loss are also considered.