Design optimization of a hybrid casing treatment based on axial momentum budget analysis in the tip flow region

Abstract

In this paper, a novel slot–groove hybrid casing treatment is designed and optimized to improve the stall margin of a low-speed axial compressor. A combination of the axial slot and circumferential groove casing treatments is utilized to increase the stall margin without incurring efficiency loss. The slot meridional profile is described with 2 B-spline curves. Circumferential grooves are parametrically described with groove height and width. An in-house optimization design platform is constructed based on the nondominated sorting genetic algorithm II and Kriging surrogate model. The optimization objectives are the stall margin and the peak efficiency of the compressor at the design rotating speed. To avoid the large number of unsteady simulations that are required to predict the stall margin, a stall margin improvement indicator is proposed based on the axial momentum budget analysis at the rotor tip region. The performance of the optimal slot–groove hybrid casing treatment design is tested and simulated. The experimental data show that the optimal slot–groove hybrid casing treatment improves the stall margin by 8.42% without generating efficiency loss. The flow details are captured by unsteady simulations and analyzed in depth. The application of the optimal casing treatment enhances the blade tip axial momentum and the interface between tip leakage flow and incoming main flow is pushed downstream. Consequently, the stability of the compressor is improved.