Affiliation:
1. State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University , Xi’an, Shaanxi 710049, China
Abstract
Surface flashover that occurs on the surface of epoxy resin (EP) is one of the main causes of insulation failure in the power system. The newly emerging polar groups on the surface are highly desirable for enhancing the surface flashover performance of EP. Here, we present a facile ultraviolet (UV) irradiation method to enable the controlled introduction of C–OH and C = O groups on the EP surface. The resultant UV-irradiated EPs (UV-EPs) are highly uniform with little variation in surface roughness while exhibiting tunable polar content with the irradiation time. We also present the first systematic investigation into the effect of UV irradiation time on the surface flashover voltage of UV-EPs, with a maximum increase of 23.07% compared to the pristine EP. Mechanistic studies suggest that the enhancement of the surface flashover voltage is mainly dominated by the density of the deep trap, which is strongly dependent on the UV-induced C–OH and C = O groups on the surface. Besides that, the UV-EPs also display long-term stability due to the stable presence of polar groups, which further demonstrates the feasibility of this method for the development of EP with excellent properties.