Study on rock strength weakening in multi-stage acid fracturing using continuous strength test

Abstract

Multi-stage acid fracturing can boost productivity in low-permeability limestone reservoirs, with success hinging on differential etching and the strength of undissolved regions to keep fractures open. Traditional rock strength test methods have strong randomness and error. This study explores the influence of four acid systems (hydrochloric acid, single-phase retarded acid, gelled acid, and emulsified acid) on fracture surface strength based on a new continuous strength test method. The rock strength weakening variation under different acid types and injection conditions was quantified, and the mechanism of single-phase retarded acid slowing down rock strength reduction was revealed. The results indicated that the fracture surfaces were reduced to a lesser extent than in traditional rock mechanical failure studies. Hydrochloric acid caused up to 28% of rock strength depletion, followed by 23% for gelled acid, 18% for emulsified acid, and 11.8% for single-phase retarded acid. Adjusting the acid injection parameters revealed that longitudinal leak-off at the fracture surface changes the rock's strength failure tendency. The microscopic results confirmed that the appropriate acid-rock reaction rate and viscosity are beneficial in reducing strength by forming the dominant wormhole that “siphons” the subsequent acid more profoundly into the formation, thereby reducing the reaction of the acid with the fracture surface. This study can help to understand better the mechanism by which acid reduces the strength of fracture surfaces and can provide guidance for selecting appropriate acid fluids for acid fracturing in low-permeability limestone reservoirs.