Abstract
High-performance one-dimensional (1D) CdSxSe1−x nanostructures arrayed photodetectors exhibit broad spectrum (450–750 nm) selective detection from the near-ultraviolet to the near-infrared regime, which has a great deal of interest in broad spectral flexible optoelectronic devices. Here, we report the microstamp transfer technology to construct high-performance rigid (SiO2/Si) and flexible (polyethylene terephthalate) photodetectors with broad spectrum selective detection, which was based on arrayed 1D CdSxSe1−x nanostructures obtained via chemical vapor deposition in a dual-temperature zone tube furnace. Photoresponse measurements have demonstrated their superior spectral photoresponsivity (∼105 AW−1), extremely high on/off switching ratio (105), rapid response/recovery time between 10% and 90% of the maximum photocurrent (0.089/0.044, 0.044/0.044, 0.133/0.131, and 0.178/0.180 s), and excellent long-term environmental photostability. Furthermore, the as-prepared flexible arrayed photodetector displayed excellent folding endurance properties (after 2000 times, the photocurrent decreases less than 50%) and stable electrical properties (bending angle from 0° to 150°). The improvement nanoarray technology in this research can be exploited to lead to the design of high-performance flexible photodevices comprising other 1D or 2D alloy nanomaterials.
Funder
The Science and Technology Base and Talent Special Project of Guangxi
Guilin Innovation Platform and Talent Plan
National Natural Science Foundation of China
Innovation Project of Guangxi Graduate Education
Subject
General Physics and Astronomy