Numerical investigation into rotating instability and the vortex structure near the tip in a transonic compressor rotor

Abstract

An unsteady simulation with a full-annular computed domain was conducted to explore the flow unsteadiness near the tip region and the mechanism of rotating instability (RI) in the transonic rotor. The numerical static pressure signals were monitored at the tip region. RI was identified by a frequency hump in the spectrum of the static pressure signal in a small mass flow coefficient with a narrow range of 0.9510–0.9174. The cross-power spectrum of two static pressure signals obtained in adjacent passages showed that the circumferential propagation speed of RI decreased with the decrease in the mass flow coefficient. The relative circumferential propagation speed of RI of the prominent mode order was −0.65 to −0.61 times the rotor speed. Details of the flow field near the tip showed that a new vortex structure was induced by the interaction of the tip leakage vortex and the shock wave, which was called as tip secondary vortex (TSV). The TSV was the key parameter to the formation of RI. The impact of the TSV on the pressure side surface generated a low-pressure area and changed the tip load of the adjacent blade. RI is result of the propagation of the interaction between the TSV and the tip load.