Structural changes in Ge1−xSnx and Si1−x−yGeySnx thin films on SOI substrates treated by pulse laser annealing

Abstract

Ge1−xSnx and Si1−x−yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective bandgap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier mobility than pure Si, and are compatible with the complementary metal-oxide-semiconductor technology. Unfortunately, the equilibrium solid solubility of Sn in Si1−xGex is less than 1% and the pseudomorphic growth of Si1−x−yGeySnx on Ge or Si can cause in-plane compressive strain in the grown layer, degrading the superior properties of these alloys. Therefore, post-growth strain engineering by ultrafast non-equilibrium thermal treatments like pulse laser annealing (PLA) is needed to improve the layer quality. In this article, Ge0.94Sn0.06 and Si0.14Ge0.8Sn0.06 thin films grown on silicon-on-insulator substrates by molecular beam epitaxy were post-growth thermally treated by PLA. The material is analyzed before and after the thermal treatments by transmission electron microscopy, x-ray diffraction (XRD), Rutherford backscattering spectrometry, secondary ion mass spectrometry, and Hall-effect measurements. It is shown that after annealing, the material is single-crystalline with improved crystallinity than the as-grown layer. This is reflected in a significantly increased XRD reflection intensity, well-ordered atomic pillars, and increased active carrier concentrations up to 4 × 1019 cm−3.