Polymer optical fiber amplifier based on all-inorganic perovskite quantum dots

Abstract

The proliferation of polymer optical fibers (POFs) has opened multiple avenues of optical-based networks and sensing applications in the visible spectral range. However, the lack of efficient amplifiers significantly hinders their utilization in practical scenarios. As emerging gain media, halide perovskites have attracted considerable attention in exploring their practical applications. In this Letter, we investigated the optical gain properties of cesium lead bromide quantum dots (CsPbBr3 QDs), and by facet dip-coating, we realized a polymer optical fiber amplifier. Under a 400-nm, 163-fs Ti:Sapphire laser pumping, the amplified spontaneous emission (ASE) thresholds of 1.6 and 20.1 μJ/cm2 were achieved through stripe pumping of a QDs-thin-film and end-pumping of a polymer-fiber facet dip-coated with the QDs, respectively. A gain coefficient of 232.2 ± 22.8 cm−1 was obtained using the variable stripe length method. By coupling a broadband continuous-wave light source into the POF as the signal, the optical gain behavior was studied with varying pump fluence and signal power density. More than 20 dB optical gain was achieved within the ASE wavelength region of 530–540 nm with a predicted theoretical maximum gain of 33.6 dB. The research verifies the feasibility of amplifying continuous-wave signals in the visible spectrum and potentially closing the research gap in visible-light optical-to-optical amplifiers. This opens the avenue for further research and innovations in practical polymer-based optical amplification for a plethora of applications, including all optical processing chips and short-range interconnects, as well as visible-light and underwater communications.