Experimental study and characteristic analysis of vacuum arc between cup-type axial magnetic contacts under different diameter-to-gap ratios

Abstract

Since vacuum circuit breakers gradually advanced to higher voltage levels, axial magnetic field (AMF) contacts have drawn a great deal of attention due to their excellent breaking ability. The cup-type AMF contact is a common kind of AMF contact, which has much potential in contact design and application of high voltage grade systems due to the advantages of strong structural strength, uniform magnetic field distribution, lower resistance, etc. This study analyzes the arcing characteristics of a cup-type AMF contact with a large slotted rotation angle at various diameter-to-gap ratios (DGRs). The arcing process is divided into five stages as follows: initial diffusion, contracting, fully constricted, re-diffusion, and extinguished. Arc self-rotation and anode separation phenomena in the re-diffusion stage appear when the DGR is 58/24. The reasons for these occurrences were discussed and explained with regard to the magnetic field vector's spatial distribution. The duration of each stage and the current threshold of a fully constricted arc will both differ with the change of the DGR. The structural parameters of the fully constricted arc were computed through the method of imaging the luminous intensity distribution after the arc was fully constricted. The source of the change in the arc voltage can be seen in the variation of arc structural parameters, which also reflect anode activity intensity to a certain extent. The transient magnetic field simulation method was used to explain why the arc under the same instantaneous current shows variable morphology at the extinguished stage and contracting stage in one arcing process. The research results presented in the article can be used as a reference for developing high-voltage cup-type AMF contacts.