Numerical study of flow past two square cylinders with horizontal detached control rod through passive control method

Abstract

A two dimensional (2-D) numerical study is conducted through the lattice Boltzmann method for flow past two square cylinders with a detached control rod placed in the horizontal position of the channel. The range of Reynolds number (Re) is fixed at Re = 150, with the length (l) of the control rod varying from l = 0.1d–21d. First, we check the accuracy of grid points and the validity of the code for present problems by comparing the results with already available data in the literature. After that, we discussed the obtained results in terms of vorticity contour, drag and lift coefficients, and force statistics. In our study of flow structure mechanisms, we examined four types of flow regimes: a small length control rod, a small and moderate length control rod, a moderate length control rod, and a larger length control rod according to flow behavior. In force statistics, we calculated the values of CDmean, CDrms, CLrms, CDamp, CLamp, and St, respectively. The mean drag coefficient contains the smallest values at the largest length, i.e., l = 19 and 21d. The maximum value of CDmean is examined at the first cylinder (C1) as compared to the second cylinder (C2) at l = 2.25d, and it is 1.2789. The values of CDmean for C2 at the length of the control rod, l = 0.1d–1.25d, and at l = 21d are negative due to the effect of thrust. The value of the Strouhal number is the same for both cylinders C1 and C2, and its highest value is 0.1036. The pressure amplitude of the drag coefficient is maximum for C1, while the pressure amplitude of the lift coefficient is maximum for C2, and its value is 2.1569.