Affiliation:
1. Northwest Institute of Nuclear Technology , Xi’an 710024, China
Abstract
This paper proposed an X-band compact efficient rectangular waveguide TE10-circular waveguide TE01 mode converter and conducted its structure design, theoretical analysis, numerical simulation, and experimental research. This mode converter is composed of a rectangular waveguide TE10–TE20 mode converter and a rectangular waveguide TE20-circular waveguide TE01 mode converter. In the design of the rectangular waveguide TE20-circular waveguide TE01 mode converter, a rectangular waveguide step is used to counteract the microwave reflection due to the discontinuity of the rectangular–circular waveguide connection, and two choke slots are involved to suppress the TE21 mode in the circular waveguide by cutting off the axial component of its surface current on the waveguide wall, so as to improve the TE01 mode conversion efficiency. The simulation results show that the reflection coefficient of the mode converter is less than 5% and the TE01 mode conversion efficiency is about 98.4% at the operation frequency of 9.3 GHz. The bandwidth with a transmission coefficient greater than 98% is about 200 MHz. The back-to-back experimental system is demonstrated, and the experimental results show that the measured TE01 mode conversion efficiency is about 98.2%, which is consistent with the simulation result.
Reference15 articles.
1. H.
Ning
, “Research on high power microwave generated by pulse compression,” Ph.D. dissertation (Tsinghua University, Beijing, 2001).
2. Z. F.
Xiong
, “Research on the technology for generating high power microwaves based on high power klystrons,” Ph.D. dissertation (Tsinghua University, Beijing, 2016).
3. X-band active-passive RF pulse compressor with plasma switches;Phys. Rev. Spec. Top.--Accel. Beams,2011
4. Active high-power RF pulse compression using optically switched resonant delay lines;IEEE Trans. Microwave Theory Tech.,1997
5. Design and experiment of microwave pulse compressor with adjustable coupling coefficient;High Power Laser Part. Beams,2018