Affiliation:
1. D. I. Mendeleev Institute for Metrology
Abstract
The need to develop a new state verification scheme (SVS) is caused by the emergence of high-precision bridges, resistance measures and boxes with a low temperature coefficient (0,02–0,5) ppm/К, highly stable transient measures, electronic resistance calibrators, and high frequency resistance measures. Recommendations how to assign the status of a working standard to measures, R-meters and measuring shunts with accuracy from 0,005 % to 0,500 %, sufficient for verification of measuring instruments, are given. SVS consists of two parts: part 1 covers electrical resistance measures, boxes and R-meters, part 2 – to measuring shunts and shunt resistance meters. Part 2 was introduced to the SVS for the first time. The revised indicators of accuracy for working standards of all levels are considered, conditions for the investigation of measuring instruments for assigning the status of a working standard, criteria for assessing metrological characteristics are given.
Publisher
FSUE VNIIMS All-Russian Research Institute of Metrological Service
Reference10 articles.
1. Samodurov I. A., Сollection of reports of the 75th International Scientific and Technical Conference, 2020, St. Petersburg, pp. 264–265, available at: https://conf-ntores.etu.ru/assets/files/2020/cp/pages/s11.html (accesed: 24.04.2020). (In Russ.)
2. Semenov Y., Samodurov I., CPEM 2010, Daejeon, Korea (South), 2010, pp. 643–644. https://doi.org/10.1109/CPEM.2010.5544296
3. Lisowski M., Krawczyk K., IEEE Transactions on Instrumentation and Measurement, June 2013, vol. 62, no. 6, pp. 1749–1754. https://doi.org/10.1109/TIM.2013.2250132
4. Jarrett D. G., Dupree A. J., CPEM 2010, Daejeon, Korea (South), 2010, pp. 571–572.https://doi.org/10.1109/CPEM.2010.5544805
5. Jarret D. G., Kraft M. E., 10 TΩ and 100 TΩ resistance measurements at NIST, X-Semetro Congress, Digest, Buenos Aires, Argentina, Sept. 25–27, 2013.