Preparation of feedstock containing water-soluble binder for powder injection moulding of silver-Reference-Cited by-同舟云学术

Preparation of feedstock containing water-soluble binder for powder injection moulding of silver

Published:2022-09-30 Issue:3 Volume:32 Page:75-79
ISSN:2630-0508
Container-title:Journal of Metals, Materials and Minerals
language:
Short-container-title:J Met Mater Miner

Author:

AUMNATE Chuanchom,NAWAUKKARATHARNANT Nithiwach,CHUANKRERKKUL Nutthita

Abstract

Feedstock for powder injection moulding of silver was prepared using water-soluble binder composed of polyethylene glycol (PEG) and polyvinyl butyrol (PVB). Silver powders with particle size in range of 1 μm to 20 μm can be mixed with PEG/PVB binder system to form feedstocks having powder loadings of 42 vol% and 45 vol%. PEG can be removed using water leaching method while PVB can be removed by thermal debinding. Specimens retained their shapes during debinding and after debinding. Components fabricated with relatively higher powder loading resulted in higher density with lower porosity. Density of specimens containing powder loading of 42 vol% and 45 vol% and heated at 700℃ is about 43% and 46% of the theoretical value, respectively. Therefore, it can be further developed for porous materials applications.

Publisher

Metallurgy and Materials Science Research Institute, Chulalongkorn University

Subject

Mechanics of Materials,General Materials Science

Reference23 articles.

1. S. Amaranan, and A. Manonukul, “Study of process parameters in conventional powder metallurgy of silver,” Journal of Metals, Materials, and Minerals, vol. 20, no. 1, pp.51-55, 2010.

2. E. Biguereau, D. Bouvard, J. M. Chaix, and S. Roure, “On the swelling of silver powder during sintering,” Powder Metallurgy, vol. 59, no. 5, pp. 394-400, 2016.

3. N. Chuankrerkkul, K. Somton, T. Wonglom, K. Dateraksa, and P. Laoratanakul, “Physical and mechanical properties of zirconia toughened alumina (ZTA) composites fabricated by powder injection moulding,” Chiang Mai Journal of Science, vol. 43, no. 2, pp. 375-380, 2016.

4. A. J. Medesi, D. Nötzel, and T. Hanemann, “PVB/PEG-based feedstocks for injection molding of alumina microreactor components,” Materials, vol. 12, no. 8, p. 1219, 2019.

5. J. Strauss, “The potential of PIM for the manufacture of precious metal jewellery,” Powder Injection Moulding International, vol. 2, no. 2, pp. 50-54, 2008.

Cited by 2 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Recycling Waste Polymer as a Binder System for Ceramic Injection Molding Feedstock;2024

2. A Review of the Application of Thermal Analysis in the Development of Bone Tissue Repair Materials;International Journal of Thermophysics;2023-07-21