Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler

Abstract

Composites materials with more than two reinforcing materials are called hybrid composites.  Tailoring the composites by hybridizing fillers, fibers and matrix will yield better properties compared to mono-composites. Hence, an effort has been made in the current research work to develop carbon fiber epoxy hybrid nanocomposites, comprising different weight percentage of Hydroxyapatite (HAP) to evaluate the potential effects on tribological properties using two body sliding wear method. Taguchi technique (L27 array) has been adopted to investigate the impact of parameters such as filler inclusion (0%, 1.5%, and 3%), load (30, 45, and 60 N), sliding velocity (1, 2, and 3 m·s‒1) and distance (1000, 2000, and 3000 m·s‒1) on wear loss of developed composite. It was observed that the combination of 1.5 wt% HAP composite showed the lowest Ks and the COF. The combination of  1.5 wt% HAP filler, 1 m·s‒1 sliding velocity, 45 N load and 3000 m sliding distance exhibited the lower Ks and COF of 0.44652 × 10‒14 (m3·Nm‒1) and 0.136 respectively. The significance of the parameters was assessed using analysis of variance, revealing that the filler's contribution significantly impacted wear resistance. Developed mathematical model using Regression analysis and the predicted values from K-Nearest Neighbors (KNN) have showed good agreement with experimental values. Micrograph images were captured to analyze the wear mechanisms evident on worn surfaces, revealing failure mechanisms such as extensive matrix damage, fiber exposure resulting from matrix removal, and fiber breakage.