Author:
Telegenov Kuat, ,Tlegenov Yedige,Hussain Shahid,Shintemirov Almas,
Abstract
<div class=""abs_img""> <img src=""[disp_template_path]/JRM/abst-image/00270005/05.jpg"" width=""300"" /> A robotic end effector prototype</div> Commercially available robotic grippers are often expensive and not easy to modify for specific purposes of robotics research and education. To extend the choice of robotic end effectors available to researchers, this paper presents the preliminary work on prototype design and analysis of a three-finger underactuated robotic end effector with a breakaway clutch mechanism suitable for research in robot manipulation of objects for industrial and service applications. Kinematic models of the finger and the breakaway clutch mechanisms are analyzed aiming to define selection criteria of design parameters. Grasping performance of the end effector prototype manufactured with a 3D printing technology and off-the-shelf components is evaluated using simulation and experimental analyses. Comparison with widely applied available robotic end effectors shows the potential advantages of the proposed end effector design. </span>
Publisher
Fuji Technology Press Ltd.
Subject
Electrical and Electronic Engineering,General Computer Science
Reference31 articles.
1. S. Jacobsen, E. Iversen, D. Knutti, R. Johnson, and K. Biggers, “Design of the Utah/M.I.T. Dextrous Hand,” Proc. of the 1986 IEEE Int. Conf. on Robotics and Automation, pp. 1520-1532, 1986.
2. M. Baril, T. Laliberte, C. Gosselin, and F. Routhier, “On the Design of a Mechanically Programmable Underactuated Anthropomorphic Prosthetic Gripper,” ASME J. of Mechanical Design, Vol.135, No.12, p. 121008, 2013.
3. T. Laliberte, L. Birglen, and C. Gosselin, “Underactuation in robotic grasping hands, Machine Intelligence & Robotic Control,” Vol.4, No.3, pp. 1-11, 2002.
4. Y. Ando, “Microgripper,” J. of Robotics and Mechatronics, Vol.2, No.3, pp. 214-216, 1990.
5. F. Chen, K. Sekiyama, B. Sun, P. Di, J. Huang, H. Sasaki, and T. Fukuda, “Design and Application of an Intelligent Robotic Gripper for Accurate and Tolerant Electronic Connector Mating,” J. of Robotics and Mechatronics, Vol.24, No.3, pp. 441-451, 2012.
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献