Author:
Usuki Hiroshi, ,Uehara Kazutake,Isaka Masakazu,Kubota Kazuyuki, ,
Abstract
Cutting tools coated with TiBON films of different boron concentrations and thicknesses are made, and then the effects of boron concentrations and coating film thicknesses on tool wear are investigated in turning and milling of Inconel 718 under dry cutting conditions. Results show that the tool coated with the film that has a boron concentration of 15% has the longest tool life, about four times longer than that of a tool coated with a single TiAlN layer. The wear progress rate of the tool decreases as the TiBON film thickness increases. Specifically, the life of tools with a TiBON film is twice as long or longer that of tools with a TiAlN film when Inconel 718 is being cut. The mechanism behind the extended tool life is a combination of the effect of preventing adhesion by the formation of oxide material along with the lubrication afforded by the deposition of BN in the high temperature range.
Publisher
Fuji Technology Press Ltd.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference15 articles.
1. M. Okada, A. Hosokawa, R. Tanaka, and T. Ueda, “Cutting Characteristics of Coated Carbide Tools in Hardmilling : – Influence of Coating Film and Base Material of Coated Carbide Tool –,” JSPE, Vol.75, No.8, pp. 979-983, 2009 (in Japanese).
2. T. Makiyama, K. Sekiya, K. Yamada, and Y. Yamane, “Development of a mist-sensor for MQL machining and effects of pattern of jetted oil mist on drill wear,” Journal of the Japan Society of Grinding Engineers, Vol.52, No.9, pp. 525-530, 2008.
3. H. Sasahara, M. Kawasaki, and M. Tsutsumi, “Helical Feed Milling with MQL for Boring of Aluminum Alloy,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.2, No.6, pp. 1030-1040, 2008.
4. H. Usuki, K. Sato, and S. Furuya, “High Speed Dry End Milling of Titanium Alloys with Coated Carbide Tool,” JSPE, Vol.71, No.4, pp. 491-495, 2005 (in Japanese).
5. D. G. Thakur, B. Ramamoorthy, and L. Vijayaraghavan, “Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts,” Materials and Manufacturing Processes, Vol.27, No.10, pp. 1066-1072, 2012.
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献