Author:
Ibaraki Soichi, ,Ota Yusuke
Abstract
This paper presents a scheme to calibrate the error map of the rotary axes of a five-axis machine tool. This is done by means of on-the-machine measurement of a test piece using a contact-type touch-trigger probe. The present probing-based approach is more suitable for efficient and automated “self-calibration,” than conventional calibration schemes, such as ball bar tests or R-test. It is thus advantageous in the application to periodic checking of the error map, or periodic updating of its numerical compensation. In the present approach, a test piece of arbitrary geometry, e.g. a raw unmachined workpiece, can be used as the probing target. An experimental demonstration is presented.
Publisher
Fuji Technology Press Ltd.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference23 articles.
1. S. Ibaraki and W. Knapp, “Indirect Measurement of Volumetric Accuracy for Three-axis and Five-axis Machine Tools: A Review,” Int. J. of Automation Technology, Vol.6, No.2, 2012.
2. H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine, “Geometric error measurement and compensation of machines – An update,” CIRP Annals – Manufacturing Technology, Vol.57, No.2, pp. 560-575, 2008.
3. ISO/DIS 10791-1:2013, “Test conditions for machining centres – Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis).”
4. Y. Kakino, Y. Ihara, H. Sato, and H. Otsubo, “A Study on the motion accuracy of NC machine tools (7th report) – Measurement of motion accuracy of 5-axis machine by DBB tests –,” J. of Japan Society for Precision Engineering, Vol.60, No.5, pp. 718-723, 1994. (in Japanese)
5. M. Tsutsumi and A. Saito, “Identification and compensation of systematic deviations particular to 5-axis machining centers,” Int’l J. of Machine Tools and Manufacture, Vol.43, Issue 8, pp. 771-780, 2003.
Cited by
39 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献