Transcriptional Characteristics of Quadrant Glitches on Machined Surface – Influence of Tool Diameter and Feed Rate

Transcriptional Characteristics of Quadrant Glitches on Machined Surface – Influence of Tool Diameter and Feed Rate –

Published:2020-09-05 Issue:5 Volume:14 Page:801-807
ISSN:1883-8022
Container-title:International Journal of Automation Technology
language:en
Short-container-title:IJAT

Author:

Nishiguchi Tadahiro,

Abstract

When a three-dimensional shape is machined by NC machine tool, motion errors occur around the motion direction changing points of the translational axis. This has a significant influence on a quality of machined surfaces. Therefore, much research on the influence of motion errors around the motion direction changing points of the feed drive system on a machined surface has been conducted to improve the quality of machined surfaces by NC machine tool. Among the motion errors that occur around the motion direction changing points of the translational axis, quadrant glitches with a stick-slip motion have a particularly large influence on the machined surface, and research on compensation methods continues to be reported. However, the transcriptional characteristics of quadrant glitches of the translational axis for machine tools have not been investigated adequately. In this study, the transcriptional characteristics of quadrant glitches of the translational axis on a machined surface were investigated. In addition, the influences of various factors on the transcriptional characteristics of quadrant glitches on a machined surface were investigated using a proposed equation and actual machining tests.

Publisher

Fuji Technology Press Ltd.

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Reference22 articles.

1. Y. Kakino, Y. Ihara, Y. Nakatsu, and A. Shinohara, “A Study on the Motion Accuracy of NC Machine Tools (6th Report) – Generating Mechanism of the Stick Motion and its Compensation –,” J. of the Japan Society for Precision Engineering, Vol.56, No.4, pp. 739-744, 1990 (in Japanese).

2. Y. Kakino, Y. Ihara, and A. Shinohara, “Accuracy Inspection of NC Machine Tools by Double Ball Bar Method,” Hanser Publishers, 1993.

3. K. Nagashima, M. Katsuki, and K. Kawakami, “Theoretical Analysis of Stick Motion Generated at the Quadrant Changing Position in NC Machine Tools and Its Compensation by an Input Adaptive System,” J. of the Japan Society of Mechanical Engineers, Vol.66, No.648, pp. 2877-2883, 2000 (in Japanese).

4. S. W. Hong, Y. J. Shin, and H. S. Lee, “An efficient method for identification of motion error sources from circular test results in NC machines,” Int. J. of Machine Tools and Manufacture, Vol.77, No.3, pp. 327-340, 1997.

5. K. G. Ahn and D. W. Cho, “Proposition for a Volumetric Error Model Considering Backlash in Machine Tools,” The Int. J. of Advanced Manufacturing Technology, Vol.15, No.8, pp. 554-561, 1999.