Author:
Uchida Gen,Yamada Takazo,Ichihara Kouichi,Harada Makoto,Kohara Tatsuya, ,
Abstract
In the grinding process, the grinding wheel surface condition changes depending on the dressing conditions, which affects the ground surface roughness and grinding resistance. Several studies have been reported on the practical application of dressing using prismatic dressers in recent years. However, only a few studies that quantitatively evaluate the effects of differences in dressing conditions using prismatic dresser on the ground surface roughness and grinding resistance have been reported. Thus, this study aims to evaluate quantitatively the effect of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance by focusing on the dressing resistance. In the experiment, dressing is performed by changing the dressing lead and the depth of dressing cut with a prismatic dresser, and the ground surface roughness and grinding resistance are measured. Consequently, by increasing the dressing lead and the depth of dressing cut, the ground surface roughness increased, and the grinding resistance decreased. This phenomenon was caused by the increase in dressing resistance when the dressing lead and the depth of dressing cut were increased, which caused a change in the grinding wheel surface condition. Furthermore, the influence of the difference in dressing conditions using the prismatic dresser on the ground surface roughness and grinding resistance can be quantitatively evaluated by using the dressing resistance.
Publisher
Fuji Technology Press Ltd.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference23 articles.
1. U. M. Srivastava, “Review of dressing and truing operations for grinding wheels,” Int. J. Eng. Sci. Technol., Vol.5, No.1, pp. 8-19, 2013.
2. R. S. Hahn, “Effect of wheel-work conformity in precision grinding,” Trans. of ASME, Vol.7, No.8, 1325, 1955.
3. M. Hasegawa and M. Kokubu, “Study on the roughness generation of ground surface (3rd Report) – Asymptotic distribution of surface roughness –,” J. Jpn. Soc. Precis. Eng., Vol.45, No.4, pp. 397-403, 1979 (in Japanese).
4. K. Ono, “Studies on grinding – On the grinding force –,” J. Jpn. Soc. Mech. Eng., Vol.18, No.74, pp. 15-20, 1952 (in Japanese).
5. B. Linke, “Dressing process model for vitrified bonded grinding wheels,” CIRP Annals, Vol.57, No.1, pp. 345-348, 2008.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献