Author:
Yoneyama Takeshi, ,Abe Satoshi,Miyamaru Michiru, ,
Abstract
Thin micro sheath heaters are embedded just under the surface of a mold during the process of laser metal sintering. This is to reduce the weld line on the molded surface by heating it just before the injection. Laser metal sintering process was interrupted at a level just below the final height to make grooves into which to insert micro sheath heaters. After the heaters were installed, laser metal sintering continued over the heaters until the final mold height was reached. Through this process, micro heaters 1 mm in diameter were embedded 2 mm under the mold surface. The mold surface was heated to 20°C over the cooling temperature by the embedded heaters just before the injection, and heating was stopped after the injection. By so doing, the weld line on the molded surface was reduced, while the cooling time was the same as in molding without such heating.
Publisher
Fuji Technology Press Ltd.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference11 articles.
1. S. Abe, Y. Higashi, I. Fuwa, N. Yoshida, and T. Yoneyama, “Milling-Combined Laser Metal Sintering System and Production of Injection Molds with Sophisticated Functions,” Proc. of the 11th Int. Conf. on Precision Engineering, pp. 285-290, 2006.
2. T. Yoneyama, H. Kagawa et al., “Effective Cooling and Accuracy Improvement in Injection Molding Using a Metal Mold with Cooling Channels Composed by Laser Sintering (3rd report),” J. of Precision Engineering, Vol.71, Issue 3, pp. 347-351, 2005. (in Japanese)
3. T. Yoneyama, H. Kagawa et al., “Accuracy Improvement in Injection Molding Using Milling-combined Laser Metal Sintered Mold,” J. of Precision Engineering, Vol.73, Issue 9, 2007. (in Japanese)
4. T. Yoneyama, H. Kagawa et al., “Reduction in Injection Cycle time Using a Milling Combined Laser Metal Sintered mold,” Seikeikakou, Vol.19, No.10, pp. 662-668, 2007. (in Japanese)
5. T. Yoneyama and H. Kagawa, “Fabrication of Cooling Channels in the Injection Molding by Laser Metal Sintering,” International J. of Automation Technology, Vol.2, No.3, pp. 162-167, 2008.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献