Author:
Petre Ivona Camelia,Stoian Elena Valentina,Enescu Maria Cristiana
Abstract
Due to the good properties related to wear resistance and vibration absorption capacity, the polymeric materials successfully replace the metallic materials. These are used in the production of sliding motion couples. Rubbing couples whose materials are polymer / steel based are of particular interest for technical use. In order to operate any mechanical system with sliding motion at optimum parameters, the indication of tribological characteristics for the materials of the frictional coupling is a convenient means of characterizing faster the tribological behavior, when the working conditions are modified. In this paper it is analyzed by the help of an experimental study, the factors affecting the wear of a coupling of polymer material/steel. Materials subjected to tribological analysis are polymeric materials, such as polyamide (PA) and polytetrafluoroethylene (PTFE) in contact with a metallic material (steel). The connection between the friction coefficient and the operating parameters (load, speed) and the rate of wear of these materials under experimental conditions will be established. Testing of the two materials was made on a pine stand on disc. The tribological tests were performed varying load and speed for a given length of friction, traveled pine. The wear of the two materials tested for the experimental conditions was measured. The experimental researches were carried out in dry friction conditions.
Subject
Materials Chemistry,Polymers and Plastics,Mechanics of Materials,General Chemistry
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献