Effect of Optimised Infill Parameters on the Tensile Properties of MEX Co-polyester Models

Author:

Wang Chen,Li Jingyao,Wang Tianyi,Wang Xiaowen,Chu Qing

Abstract

To optimize the infill parameters and improve the tensile properties of 3D printed polyethylene terephthalate-1,4-cyclohexanedimethanol ester (PETG) models, this study explored the effects of infill thickness, infill flow rate, and infill overlap length on the tensile properties of 3D printed PETG models via the one-way test combined with the Taguchi test. The results of the one-way test showed that the tensile strength and elastic modulus of the PETG models increased with the increase of infill thickness, infill flow rate, and infill overlap length. The results of Taguchi s test showed that the influence of infill parameters on the tensile properties of PETG models was as follows: infill thickness ] infill flow rate ] infill overlap length; the optimized infill parameters were: infill thickness of 1.2 mm, infill flow rate of 120%, and infill overlap length of 2.8 mm, and the tensile strength of the 3D printed PETG models with optimized parameters was 20.13 MPa, and elastic modulus was 1.32 GPa, which gave the best tensile properties.

Publisher

Revista de Chimie SRL

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3