Mechanical Properties of Some Epoxy-PMMA Blends

Abstract

The thermoset polymers and the thermoplastic polymers matrix composites require different forming techniques due to the different properties of two classes of polymers. While the forming technique for thermoset polymer matrix composites does not require the use of special equipment, the thermoplastic polymer matrix composites imposes the rigorous control of temperature and pressure values. Each type of polymer transfers to the composite a set of properties that may be required for a certain application. It is difficult to design a composite with commonly brittle thermoset polymer matrix showing properties of a viscoelastic thermoplastic polymer matrix composite. One solution may consist in mixing a thermoset and a thermoplastic polymer getting a polymer blend that can be used as matrix to form a composite. This study is about using PMMA solutions to obtain thermoset-thermoplastic blends and to mechanically characterize the obtained materials. Three well known organic solvents were used to obtain the PMMA solutions, based on a previous study concerning with the effect of solvents presence into the epoxy structure.