Author:
Zhao Hao,Xia Renbo,Chen Yueling,Tao Liming,Zhao Daixian,Zhang Tianyu
Abstract
Inspired by the idea of the coordinate transformation of the robot arm, the tube structure is analogized to the robot arm structure, and the conversion method of the tube bend processing parameters LRA to the three-dimensional coordinate points is obtained. The method first regards the tube as a “mechanical arm”; then, using the similarity of the LRA processing parameters and D-H parameters, all the LRA parameters are converted into D-H parameters; finally, the D-H parameter method is applied to calculate the distance between each axis of the " mechanical arm ". If the first space coordinate point is defined as the origin of the base coordinate system , then the position of the origin of other coordinate systems in the base coordinate system can be obtained; It has been proved by experiments that this method fast and feasible.
Publisher
Darcy & Roy Press Co. Ltd.
Reference10 articles.
1. Liu Jianhua, Huang Hao, Jin Peng, et al. A catheter measurement method based on adaptive primitives[J].Chinese Journal of Mechanical Engineering,2021,57(22):71-79.
2. Nie Qi, Cheng Yuqiang, Wu Jianjun. Simulation of gas-liquid circuit failure of spacecraft propulsion system [J]. Journal of National University of Defense Technology, 2017, 39(2): 32-41.
3. Guo Feiyan, Wang Zhongqi , Liu Jianhua , et al. Locating method and motion stroke design of flexible assembly tooling for multiple aircraft components[J]. The International Journal of Advanced Manufacturing Technology, 2020, 107(1-2):549-571.
4. Tao Zhijun, Yang He, Li Heng, et al. Research and development of digital-to-analog conversion system for CNC pipe bending based on CATIA [J]. Chinese Journal of Plastic Engineering, 2011, 18(04): 90-96.
5. Bai Xueshan. Application of catheter digital manufacturing technology in the development of a new type of aircraft [J]. Aviation Manufacturing Technology, 2014(14):83-85.