Author:
Ali Masalina Md,Shah Muhammad Amir Mat,Alias Siti Khadijah,Pahroraji Hazriel Faizal,Abdullah Bulan,Hairi Haryana Mohd,Shamsudin Azizul Hakim
Abstract
AbstractThe effects of inhibitor concentration on the corrosion rate and inhibition efficiency of AISI 1020 steel in an acidic and alkaline environment were investigated by means of weight loss measurement at an interval of 7 days and 14 days. To carry out this investigation, the Arachis hypogaea hull was extracted and concentrated in various weight percentages. The inhibition efficiency increased with the increased concentrations of AISI 1020 steel that were immersed in acidic and alkaline solution in the absence and presence of varying inhibitor concentrations of Arachis hypogaea hull extracts. The corrosion behavior, including the corrosion rate, is meticulously characterized through the corrosion rate analysis. The results showed that there is an increase in inhibition efficiency with an increase in inhibitor concentration and that there is a decrease in inhibition efficiency with an increase in immersion time. The organic inhibitor (Arachis hypogaea hull) produced the best inhibition efficiency of 96.4% at a 30% concentration. From the result obtained, Arachis hypogaea hull extracts revealed that it is best suited for inhibition of corrosion of mild steel in both acidic and alkaline environments. The goal of this research paper is to develop a comprehensive understanding of the corrosion inhibition and adsorption mechanisms associated with the implementation of the Arachis hypogaea hull as a natural corrosion inhibitor.
Funder
Geran Penyelidikan Strategic Research Partnership
Publisher
Springer Science and Business Media LLC
Reference23 articles.
1. Darvell BW (2018) Corrosion. Materials science for dentistry, 10th edn.
2. Ikechukwu E, Pauline EO (2015) Environmental impacts of corrosion on the physical properties of copper and aluminium: a case study of the surrounding water bodies in Port Harcourt. Open J Soc Sci 3:143–150
3. Park J-H, Hagio T, Ichino R (2023) Improvement in the corrosion resistance of electrodeposited Ni-W alloy by MWCNT co-deposition and prevention of metal-carbon interfacial corrosion by carbide formation. J Alloy Compd 939:168788
4. Rittihong U, Tunmee S, Supruangnet R, Nakajima H, Songsiriritthigul P (2023) Structural, mechanical properties and corrosion performance of multilayer Ti doped-DLC/Ti films deposited on low-carbon steel. J Phys: Conf Ser 2431(1):012059
5. Chigondo M, Chigondo F (2016) Recent Natural Corrosion Inhibitors for Mild Steel: An Overview. J Chem (10):1–7. https://doi.org/10.1155/2016/6208937